|
Previous
Generation and Specialty Probe Parts
(Prices
listed are USA Prices. Foreign prices are higher, plus taxes.)
Previous
Generation Single Crystal Holder Cubes (prior to 1998 )
Part
number |
Item
description |
Price
in US dollars |
| #
25400 |
Alumina
crystal holder cells |
$
190 |
#
25015 |
Plastic
crystal holder cells |
100 |
Doty
DOR Probe Accessories
Part number |
Item description |
Price
in US dollars |
#
95707 |
5-mm
DOR bench spinner |
$
4,680 |
# 95706 |
Outer
rotor DOR/MAS bench spinner |
6,080 |
#
97560 |
MAS
Spin rate detection preamp |
800 |
# 99451 |
DOR
Spin rate detection preamp |
800 |
# 17270 |
14 mm MAS zirconia
rotor |
725 |
# 96790 |
14
mm MAS Torlon or Aurum long turbine cap pair |
175 |
#
91815 |
DOR
outer rotor assembly |
8,030 |
# 42097 |
5-mm DOR silicon
nitride inner rotor |
585 |
# 96460 |
5-mm DOR inner
rotor turbine cap pairs |
200 |
#
96506 |
DOR
Sample Packer & packing
tools |
1215 |
5
mm Caps for Doty Low Temperature Probes (prior to 1998 )
Part
number
|
Item
description
|
Price
in US dollars
|
#
96990 |
Kel-F
Cap Pair for Low Temperature Probes |
$
210 |
#
97020 |
Torlon
or Aurum Cap Pair for Low Temperature Probes |
200 |
Previous
Generation High Temp Probe Accessories (prior to 1999)
(-100°
to 650°C) MAS and Wideline
Part
number
|
Item
description
|
Price
in US dollars
|
#
7532 |
Silicon
nitride high-temp rotor (requires a screw and insert) |
$
665 |
# 7530 |
Zirconia
high-temp rotor (requires a screw and insert).
Note:
Use zirconia high temp rotors only with
zirconia HT spinner assemblies
|
665 |
# 7548 |
High-temp wide-line non-spin rotor
(screw and insert required) |
150 |
# 7890 |
Boron-nitride high-temp rotor insert |
40 |
# 8140 |
Macor high-temp rotor screw |
35 |
# 7830 |
Zirconia high-temp rotor screw |
140 |
Penguin
Probe Accessories |
Nominal
* |
Over-
Size
* |
Under-
Size
* |
Rotors
|
Price
|
#
42388 |
#
13261 |
#
13263 |
5
mm Penguin/
SS
Silicon-Nitride Rotors |
$
585 |
#
42396 |
#
13262 |
#
96442 |
5
mm Penguin/
SS
Zirconia Rotors |
430 |
|
#
96441 |
- |
- |
5
mm Vespel Extended VT
Turbine
Cap Pairs |
220
|
#
96442 |
- |
- |
5
mm Kel-F Extended VT
Turbine
Cap Pairs |
220
|
*Nominal-Size
Rotors -
Satisfactory
for full temperature range
Over-Size
Rotors -
For best spinning with helium gas at lowest temperatures
Under-Size
Rotors -
For best spinning with helium
gas at room
temperature
and above |
If unsure about correct supplies,
contact us with the DSI-serial number and we can help.
Please
refer to rotor main page
for materials information.
Please
contact accessories@dotynmr.com with
questions.
|
